• Tue, Apr 5 2011

    Introducing… Vesta

    By jess at 12:15 pm

    Futon? Check. Posters? Check. Enough ramen noodles to feed a small country? Double check.

    Now, Quirky has one more thing to add to your list of dorm room, first apartment, and starter home essentials: Vesta, a hot pot that lets you heat water, noodles, pasta, and other liquids, then eat or serve from the very same bowl.

    Vesta is now available in the Quirky store for $29.99 presale ($34.99 retail) with a threshold of 1600. Big congrats to Judi Sigler and the 648 community members that came together to make this product happen!

    Features:
    – Thermo-insulated design traps heat to keep the bowl’s contents warm, while the exterior remains cool to the touch.
    – Integrated spout and pour/carry handle, so you can easily serve tea and other hot beverages.
    – Lid includes an integrated, removable stainless steel spoon.
    – Temperature control dial lets you turn on the device and adjust the temperature from warm to boil.
    – Thick plastic exterior, with stainless steel interior and spoon.
    – White matte finish with burnt orange accents.
    – Holds approximately one liter (3-4 cups).
    – Charges with a standard 120V charger.

    Vesta comes with four parts: bowl, spoon, lid, and base.

  • Mon, Apr 4 2011

    EVAL 118:

    Inventor: Jim Hacsi
    Selected: Collapsible Mop Bucket

    Community: 18
    D: 6
    M: 7
    V: 6
    Staff: 20
    Total: 57

    Design liked the space saving functionality of this idea, along with the many options for use (gardening, bathing pets, etc.) Market thought it was a good solution to a common problem that absolutely has market demand. COuld be the Unhampered of mop buckets! Viability could see no problems with manufacturing, but noted that it could be a challenge to make it rigid, flexible, and watertight. Also noted that there may be a tiny chance for a patent. In the end, we decided to bring this submission into the development phase; it’s a clever solution to a common problem and we could potentially sell a lot of units.

    The Rest of the Field…

    Inventor: Michael Liu
    Submission: Plastic Wrap Dispenser

    Community: 34
    D: 4
    M: 6
    V: 7
    Staff: 0
    Total: 51

    Design felt that many people could relate to the problem and that the design process could result in a more aesthetically pleasing version than the current available options. Market noted that this sort of product would be an impulse buy. It would work well as a line extension to current kitchen products. However, it asdds another step to the process and though it may look good, you don’t really need it. Viability felt that it would be very easy to make if it was just simple plastic parts. There would be nearly zero chance to get this product patented.

    Inventor: Joseph McMillan
    Submission: Multi Toilet Paper Adapter

    Community: 30
    D: 5
    M: 4
    V: 8
    Staff: 0
    Total: 47

    Design thought that the problem being solved was more of an “annoyance” then a true problem. However, they liked the idea of bringing a normally industrial product to a consumer level. Could be made especially for families with young kids or really anyone in a shared living space. Market didn’t think it would be a must-have ite and noted that it would be very hard to make this universal. Viability had no problems on the manufacturing front but noted that there would be a tiny chance for patentability.

    Inventor: Mike Elliot
    Submission: Ice Bore

    Community: 24
    D: 2
    M: 4
    V: 7
    Staff: 0
    Total: 37

    Design thought that in addition being a tough engineering challenge, as proposed, the product would be messy to clean and in general was not a much better solution than just running a scooper under hot water. Market didn’t feel like this was an area that really needed innovation – scoopers do the job just fine. Viability noted that although it would be easy to manufacture, engineering would be significantly difficult. Most likely no chance for patent protection.

    Inventor: Marnie Perri
    Submission: Zip Loc Bag Rolodex

    Community: 21
    D: 4
    M: 3
    V: 6
    Staff: 0
    Total: 34

    Design felt that this idea seemed very versatile in that many different types of people would use it. Though they noted that there was a limited degree of wow factor, they thought that it could be seen as a solution to the “junk drawer” problem. Market thought that the product wouldn’t necesarily fit into Quirky distribution or branding very well and that the problem was not especially large. Viability put the pricing at anywhere between $3 and $20. The softgoods parts would be hard to make, but the plastic ones would be very simple. There would be very little chance of getting patent protection for this product.

    Inventor: David Quirk
    Submission: Mixing Bowl with Control Spout

    Community: 20
    D: 5
    M: 5
    V: 6
    Staff: 0
    Total: 36

    Design noted that though this solution reduces mess and the need for extra spoons, the potential for leaking and cleaning challenges was not to be disregarded. Perhaps a simpler design would fare better. Market saw this as a possible line extension, noting that there was mass market opportunity if the feature alone could make it stand up to competitors. Viability noted that making the spout mechanism could be difficult. There may be a small chance for patent protection.

    EVAL 119:

    Inventor: YC Chan
    Selected: Tripod Case

    Community: 37
    D: 3
    M: 6
    V: 6
    Staff: 18
    Total: 70

    Though design thought that there was a viable problem being addressed, they also pointed out that there were nearly identical products on the market and that conceptually, the product might be a competitor to DigiDudes. Market thought the feature was an interesting, innovative addition to the camera case market, which is very large. Viability noted that the softgoods could be an issue and that there’s potential both for patet infringement and patent protection. The manufacturing challenge would come in making it “universal” to all cameras. In the end we decided that this product could do very well in the market – there are many situations where it could come in handy and the feature is unique enough to stand out against competition.

    The Rest of the Field…

    Inventor: Denny Fong
    Submission: Flash Enhancer

    Community: 26
    D: 5
    M: 4
    V: 7
    Staff: 5
    Total: 47

    Design liked the idea of bringing professional tools to mass market and thought that the challenge of making this product universal without adding too much bulk would be interesting and engaging. Compatibility with the iPhone camera was noted. Market thought that though the solution made sense, there is a lack of market opportunity, as it would only do well in specialty stores. Viability stated that it would be easy to make, as it would just be molded plastic. This product would most likely not be patentable.

    Inventor: Ryan Kent
    Submission: Photo Download Hub

    Community: 23
    D: 5
    M: 7
    V: 5
    Staff: 5
    Total: 34

    Design felt that the world of photo-sharing is currently extremely easy and that this idea, though clever on its own, doesn’t seem to measure up to current models. Market noted the same thing, stating that many similar items exist, along with social media sites that perform similar function. Viability thought that it could sell for $15 or $20. We have suppliers for USBs, but we would need to find someone for the card reader. There seems to be a high risk for patent infringement.

    Inventor: Eric Shore
    Submission: Photostreamer

    Community: 22
    D: 4
    M: 3
    V: 4
    Staff: 0
    Total: 33

    Design thought this product was much too “novelty”. Also, it would most likely be expensive to manufacture – hooking an ipad up to a tv would be a cheaper, easier alternative. We would need a software engineer. Market noted that the market for digital photo frames is very competitive – retail prices are continually dropping and shelves are dominated by top-notch companies like Pandigital, Sony, and HP. Viability said that this idea could very well need to be sold at a price point of $300, would require a software engineer, and would need to be put through ETL testing. There is a risk of patent infringement and a moderate chance of patent protection.

    Inventor: Peter A. Wachtel
    Submission: E-Grips

    Community: 20
    D: 4
    M: 4
    V: 7
    Staff: 0
    Total: 35

    Design noted that the chance to explore iPad-as-camcorder use could be an interesting task. However, many iPad cases already offer much of the proposed functionality. Market didn’t think the problem was large enough to warrant such a solution and it wasn’t necessarily a “must-have”. Also, not very portable in its current design. Viability could foresee no problems with manufacturing. The patent landscape is complex, but there may be a possibility for protection.

    Inventor: Tyrel Hatfield
    Submission: Battery Charging Camera Case

    Community: 5
    D: 5
    M: 6
    V: 5
    Staff: 0
    Total: 21

    Design liked the way that it solves the problem of messy camera bags with tangled cords and missing batteries – this could be a good product for use before a big outing or trip. Not much wow factor, however. Market favored this type of charging over solar powered cases and thought that it fit our distribution channels. Viability thought that there would be a definite challenge in manufacturing a joint softgoods and electronics product. Seems like there would be very little, if not zero chance of patent protection.

    Inventor: Joshua Beckstrom
    Submission: Steadicam Camera Holder

    Community: 6
    D: 3
    M: 5
    V: 7
    Staff: 0
    Total: 21

    Design commented on the way that this product would bring professional equipment to a consumer market. They would have to explore ways of keeping this as an “on hand” compact product. Market sees very little mass appeal – it’s a specialty item. The only way this could be viable on store shelves would be if it were compact and telescoping. Viability could see no difficulties in manufacturing (since it is just metal and plastic) other than making sure it worked universally. Price range could be as low as $30 or as high as $100 depending on quality of build.

    Inventor: Claire Davis
    Submission: Sliding Camera Bag

    Community: 4
    D: 4
    M: 4
    V: 7
    Staff: 0
    Total: 19

    Design didn’t see the wowfactor of this product. It would be useful for keeping fresh batteries on hand, though this functionality is already available in many other bags (though not camera bags). Market didn’t think this was a “must-have” product – it only solves a small problem and is quite specialty-oriented. Viability noted that softgoods is still a category we have issues with. There seems to be a high chance of patentability.

  • Mon, Apr 4 2011

    We’ve got some exciting projects to tackle over the next month or so. It’s never too early to start brainstorming!

    4/11: Material A (a materials-based brief co-sponsored by Material Connexion, an awesome materials library here in NYC)

    4/18: TBA

    4/25: Garment Upkeep

    5/2: Hooks

    5/9: Drying Racks

    5/16: Jewelry Storage

    5/23: Microfiber (another materials-based brief)

  • Mon, Apr 4 2011

    Paper towels are a mainstay in most households. But holding and storing bulky rolls can get tricky. It’s time for the Quirky community to step in.

    Let’s come up with an innovative take on the paper towel holder.

    In this project, we want to explore different modifications on a very simple product. We can look at a couple of areas, to start:

    - Where do people want to store their paper towel rolls?

    - When you ship towel holders, you end up shipping a lot of air. How can we make more efficient use of design and materials?

    - Allowing the user to easily tear off a piece of paper without unraveling the roll is really important in this market. How can we bring fresh innovation to this function?

    Note: There are a lot of cool products out there, and a tricky IP landscape. Don’t forget to do your research to make sure your great idea isn’t already out there!

    Submissions are free, and the deadline is April 11th, at 12 noon ET. Let’s extend our kitchenware line with something awesome.

    SUBMIT NOW!

  • Fri, Apr 1 2011

    The Tech Team is excited to introduce a brand new feature to the product evaluation process: Most Active Sort!

    The purpose of this sort is to continuously surface ideas that are interesting and worth further evaluation. The sort will provide an hourly ranking of the community’s engagement with an idea. We want to show you what’s the most pop– we mean, the most active ideas on the site.

    Let us know what you think!

  • Fri, Apr 1 2011

    Due to popular demand, the Tech Team has decided to REMOVE the controversial Most Popular sort from the Product Evaluation process, effective immediately.

  • Fri, Apr 1 2011

    Let’s talk about matches made in heaven. There’s peanut butter and jelly… Thelma and Louise… Jack and coke… rubber bands and hooks… Yes, you read that last one right. Bandits are now available for $9.99 for a pack of 20, with a threshold of 1000.

    Bandits are rubber bands, with hooks.

    Yup, it’s really that simple. But imagine the possibilities:

    - Fastening up pens or drawing supplies
    – Suspending excess cords from shelving
    – Hanging a bottle from a baby stroller
    – Hanging sunglasses from a rearview mirror
    – Tying up jewelry

    And the list goes on…

    Features:

    - Rubber elastic, with a hook made of glass-filled polypropylene.
    – Sold in a pack of 20.

  • Thu, Mar 31 2011

    One night. 7500 Wrapsters. 35 staffers (and friends). Open bar. Go.

    For more pics, check out our Facebook page.

  • Wed, Mar 30 2011

    Thank You!

    By jess at 4:08 pm

    A ginormous THANK YOU to everyone who stopped by our lil’ shindig last night. We stayed past 2am wrapping thousands upon thousands of Wrapsters, and as a result, we’ll be able to fulfill our March orders without the additional packaging expense. A fun video (and better photos) of the festivities is on the way, but we didn’t want to delay telling you that you seriously, seriously rock. Like, big-time.

    Love, The Quirky Team

  • Tue, Mar 29 2011

    Hey guys and gals!

    My name is Andy Garcia (not the actor). I’m the newest addition to Quirky, and I’m pumped as heck about it. I proudly hail from northern New Jersey — but I don’t sport a fake tan, have abnormally large muscles, or own an Ed Hardy t-shirt. I’m a pretty normal dude actually. I’m a lover of independent music of all genres, I play electric guitar, I’m a hobby photographer, and I’m a deep thinker. Last important tidbit: I’m a 2009 alum of The College of New Jersey and I miss it so much — Go Lions!

    So, I’ve been brought on to the Quirky team as a Community Ambassador, and I’m excited to interact with the community and be a witness to the awesomeness that the community (along with the Quirky team) is creating. I’m honored to be a part of this movement and I’m looking forward to the challenges and rewards that the work will bring!