• Thu, Oct 21 2010

    Quick, everyone, go to Quirky.com!

    You knew it was coming: we’ve brought the site down. We’ll be back soon, bigger and better than ever.

    Rock!

  • Wed, Oct 20 2010

    Hey there,

    We’re preparing for the launch and patching up some last-minute holes. We were hoping to get this all finished by this afternoon, but programming can be pretty unpredictable. Bugs and glitches can rear their heads at the worst times.

    We’ll launch the site when it’s ready, possibly later tonight.

    We don’t want to bring down the site until we’re good to go, so all you Quirks are in luck — you’ll have a bit more time to say your goodbyes to the old Quirky.

    –Lacy

  • Tue, Oct 19 2010

    Tomorrow evening, we will be bringing down the site at 6PM (EST).

    Don’t panic.

    It will be okay.

    When we return, we’ll be unveiling some major changes. We think you’ll like them.

    Love, The Sleep-Deprived, Over-Caffeinated Quirky Team

  • Tue, Oct 19 2010

    … and that’s just a tiny section of the Quirky Community Happiness Wall.

    Wanna be a part of it? You’re in luck. We’re adding to our team!


    Community Ambassador

    We’re not looking to create a “Hello, my name is Mary, this call will be monitored and recorded” kind of service culture.

    We’re looking for candor and conversation, with a healthy dose of audaciousness.

    We believe that our community (which includes inventors, customers, and creative folk) deserves to be treated as partners. We’re in this together.

    Don’t worry; it’s fine if your name is Mary… as long as you’re a Mary who possesses that intangible ability to understand and react to what people want and need without them even asking for it. A Mary who can coordinate and manage like none other, and who cares immensely about people, and more importantly the community which she (or he) is serving.

    A little about us (if ya didn’t already know):

    Quirky is a consumer product company. But, as our moniker suggests, we do things a little differently. We design and launch two new products each week. We do this with the help of a worldwide community of inventors and creatives who help us out via this little thing called the Internet.

    Quirky’s success is very much in the hands of our community. Our community is uniquely positioned as the main source of our ideas for new products, our marketing, our direct sales efforts, and our sanity (ahem).

    You’ll be communicating with people who come to Quirky for many different reasons:

    - To our inventors and prospective inventors: Welcome and walk inventors through the Quirky process. Convince them that we’re the right partners for bringing their product ideas to life.

    - To our influencers: Help community members navigate Quirky’s unique product development process. First-time user needs help because he doesn’t know how to submit his great product name idea… for 2 hours… on the phone? On it.

    - To our customers/shoppers: We want to deliver the world’s best customer service and believe that great service can easily turn a customer into an inventor and community member. Make ‘em happy.

    - To the Quirky team: lead an ongoing back-and-forth conversation between our employees and our community.

    Our ideal superstar would have:

    - EXCELLENT writing and speaking ability.

    - Ability to organize and respond to a high volume of emails and phone calls.

    - Confident, convincing, and contagious personality.

    - Flexibility with working hours.

    - Desire and ability to wear many hats and throw down when necessary… remember, we’re a start-up!

    To apply, first check out our website at www.quirky.com. Sign up, poke around, participate. After you’ve done this, send your resume and a quirky, personalized cover letter to [email protected]. Oh, and if you have a blog or Twitter account, send us a link to that too. No recruiters or third-party applications, please.

  • Mon, Oct 18 2010


    Tech, minus Chris, doin’ what they do.

    Hey folks,

    The good news: we’re almost there! Lacy and the Tech team are working on cleaning up all the “little things” to make the transition as smooth as possible. There’s lots of data to migrate, and lots of images to reprocess. We’ll likely be working late into yet another night.

    The major hold up right now is reprocessing over 15,000 images and creating 14 new sizes of each of those images. Do the math.

    Throughout the evening, don’t be alarmed if the site acts a little, well, quirky. This is normal. Rest assured that your data will remain safe and secure.

    Hopefully the next time we chat, it’ll be with a new site — it’ll be as early as Tuesday morning, or as late as Wednesday afternoon. It shouldn’t be much longer then that. Trust — we’re itching with as much anticipation as you are.

  • Mon, Oct 18 2010

    What we’ve been up to the last 3 weeks…

    Since we last checked in 3 weeks ago, we’ve been working diligently to make sure that all parts of the Sling Back work well together, our main variable being the spring. Our co-workers at Q-Asia were able to get a spring from our factory that we slipped into one of our prototypes. We received it and tested it tw0 weeks ago, but we could tell right away that our initial spec’s were just too weak. While we could get Sling Back to wind up, it wasn’t pulling the cords in with the ease that we wanted out of the final product.

    Since then we’ve been experimenting in the shop, ripping apart cord retractors on the market and cannibalizing their parts and spring so we could place a larger spring into our Bertha printouts. While using these prototypes we realized that when the user is winding Sling Back up, he/she has no way of knowing when to stop. This led to a lot of broken Bertha printouts, and it also led to us working on a feedback mechanism. In the new iteration of the spring mechanism, once the spring is wound to its end, it pops around a quarter of the way, so you can clearly feel that you’ve wound to the end.

    Other noteworthy happenings include ditching the Large version of Sling Back (pictured in the last blog post), and experimenting with an X-tra Small size for headphone wires. While we’re only moving forward with the Small and Medium versions for now, we see the Large and X-tra Small versions as potential line extensions for the future. We also began working on new renderings to present to interested retail partners.

    What we expect to happen in the next 3 weeks…

    While we were unable to use the initial spring Q-Asia sent us, they have been busy working with the factory and our engineers to resolve that issue. On Tuesday, sourcing extraordinaire Nikki Laffel will be traveling over to China with our Bertha print outs of the new mechanism and housing. She’ll be working very closely with our team and the factory to make sure we get the right mechanics for the spring. Our hope is that the spring issue is resolved by the end of the week, and we can kick off tooling right away.

    Keep a look out on the site as we also plan to launch updated renderings for the Sling Back later this week. Here’s a sneak peek:

  • Mon, Oct 18 2010

    Payouts to our international community of influencers are growing, so it’s time to talk about taxes. Boo. Hiss. Our CPAs looked into the rules and confirmed: payouts to international influencers are subject to United States taxes.

    Quirky must withhold a percentage of your payout based on the applicable tax treaty, if any, between our countries. Percentages withheld under tax treaties will generally range between 5-15% and are submitted directly to the Internal Revenue Service. Please note, if no treaty exists between the United States and your nation, Quirky must withhold 30% of the payout amount for payment to the Internal Revenue Service.

    So, here’s how it’s going to go down. If you’re the lucky first person in your entire country to receive a Quirky payout, you’ll need to give us a week or two to figure out if a treaty exists. You can help us by shooting us an email if you know you’ll be the first in your country to request a payout. We’ll do our best to get a head start on the research.

  • Fri, Oct 15 2010

    Hello All,

    We’re up with Quirky version three on our testing servers and banging through it thoroughly. There are lots of big changes like the addition of multiple line item orders (a proper shopping cart), search, etc. that need to be carefully managed, data-wise.

    We’re happy with the way it’s looking but want to be sure we poke around a bit further before rolling it out. We will be here late tonight and there is still a possibility we may roll it out, but most likely we’re shooting for Monday morning at this point.

    When we do roll it up, you’ll probably experience a few hours of intermittent downtime — and then we’ll be all up and running.

    Mike will keep you posted as things progress through the weekend.

    b


  • Fri, Oct 15 2010

    Quirky Brief #4 kicks off Monday around noon. Details after the vid!

    If your homes are anything like our homes, the kitchen is the center of the action. You cook there. You eat there. You catch up with family members and roommates there. For all intensive purposes, the kitchen’s the place to be.

    This week, we’re presenting less of a challenge and more of a category brief:

    Let’s come up with cool stuff for your kitchen.

    We’re looking for products that will make it easier and fun-ner to make and break bread. It could be anything: something for cooking, something for doing dishes, something for your fridge… let your imagination run wild!

    The possibilities for this brief are endless. We can’t wait to see what you come up with.

  • Thu, Oct 14 2010

    What’s happened over the last 3 weeks (and then some!)

    It took us a while to find some good factories for Switch. When we first began our search over the summer, we fell in love with one manufacturer. The work they had done in the past impressed us, and we began moving forward working with them. Unfortunately, the longer we stayed with them, the more difficult they became… and the more they tried to put off our project. We had to move on.

    There are a lot of generic pocket knife manufacturers out there, but after a long search, our staff in China found two factories that do quality work for us to choose from. When we requested quotes on pricing and timeline from both, they came back far too high for us to keep Switch priced under $80. Over the past three weeks, we’ve been editing and revising to drive the unit price down.

    The first change we had to make was dropping the USB memory stick as one of the tools. The price for that one tool was about 25% of the entire unit cost. It was a tough choice to make, but after we asked Switch ideator Jim Robinson, and he gave us his approval, we did what had to be done.

    Another change we’ve made is simplifying the box. The original intent was to have a blow-molded box with a sliding lock. Last week we revised it to one injection molded piece that will use a living hinge along its spine and on its clasps. This change takes three parts down to one, and uses a simpler (and cheaper) production method.

    Now the two factories are requoting based on those changes as well as a few slight material changes. Where some pieces are expensive to machine out of metal, they are much cheaper to inject with a rigid plastic (like glass-filled nylon, or polyester). Obviously we would never sacrifice the functionality of Switch, or its beauty with these changes, so don’t worry. We should have the quotes back any day, and we’ll be picking a factory next week.

    What we expect over the next 3 weeks

    We’ve sent the Switch prototype over to China, and next week when we choose a factory, the Q-Asia sourcing and engineering teams will bring it to the factory to discuss it with them. Both factories originally wanted to prototype Switch before kicking off production to see if it actually worked, but since we already have a prototype that works, they’ll be able to skip that process. We know that Switch production has been a long process (too long) but next week we’ll be finalizing a purchase order with a factory, and since we’ve already got the working prototype finished, we’re hoping to kick off production within the next two weeks.

    Switch is available in the Quirky store for $79.