Author Archive

  • Wed, Nov 23 2011

    Requests from retail partners for certain products are a recurring opportunity for Quirky and the Quirky community. Our retail partners regularly share with us their latest insights into products and categories that are about to trend. Often these insights develop into design briefs to help develop the next big thing. When a key retail partner came to us to develop the next ‘portable charging station’, we made immediate moves towards starting community development on the product.

    In this case, we quickly came to the realization after launching the design brief blog post, that what we were asked to create very closely reflects William Fine’s original submission for Trek Support. When comparing the key features in isolation, they are, for all intents and purposes, the same product. The difference is in the superficial ‘soft good’ manifestation (backpack versus something more ‘convenient to transport’). Upon reflection, this small difference did not feel like it warranted a completely new product, and that a great deal of the art required for execution of the portable charging station already existed in the development of Trek Support.

    The next step was to decide what was the right move for the product, inventor and community. After reaching out to William and weighing up several options, we are moving ahead with the decision to treat this brief as an opportunity to re-imagine the key features of Trek Support. We will therefore be opening up a new ‘redesign phase’ within the Trek Support project, piggy-backing off the hard work already done by the community and QDS, and honoring the associated influence.

    At the launch of this redesign phase, we will confirm how much influence there is up for grabs.

  • Mon, May 30 2011

    Eval 137

    Inventor: Brandon Craven
    Selected: Solar Powered Blinds

    Community: 29
    D:05
    M:02
    V:03
    Staff:14
    TOTAL:53

    This stimulated a lot of debate. This submission had a very low DMV going into eval. Our discussion centered on expanding the scope of the submission to become more mobile; something that could be used for charging in places where there is no electricity available e.g. camping, in a parked car, etc. The possibilities caught the imagination of the staff and we are relishing the chance to explore a new area of manufacturing.

    Inventor: Robin Huberty
    WILD CARD Selected: Improved Toilet Bowl Brush

    Community:09
    D:07
    M:08
    V:06
    Staff:09
    TOTAL:39

    Very healthy DMV scores for this one. While the solution presented needs more innovation to make it sing, the problem area highlighted is ripe for exploration. There has been little innovation in this category for the last decade or so. Add to that strong retail interest in our plunger Nautilus, and you have the beginnings of a potentially successful line extension.

    The rest of the field

    Inventor: Jared Joyce
    Submission: Magnetic Light Switch Plate

    Community: 34
    D: 05
    M: 05
    V: 08
    Staff: 00
    TOTAL: 52

    Design felt that this had a ‘quiet innovation’ to it, but were concerned about impeding the functionality of a light switch by hanging keys from it. Market felt that it didn’t really solve a problem but that it had mass appeal. Viability commented that this was easy to make, but patent protection was unlikely.

    Inventor: Jared Joyce
    Submission: Flip-out Shelf Outlet Plate

    Community: 32
    D: 03
    M: 03
    V: 06
    Staff:00
    TOTAL:44

    Design felt that this was not unique and that similar items exist on the market. Viability showed close commercial products and patents exist.

    Inventor: Bill Ward
    Submission: Culinary Bowl Stand

    Community: 31
    D: 04
    M: 05
    V: 07
    Staff:00
    TOTAL:47

    This submission stimulated some debate, again centered around who would use this, and how it would offer more function than simple nesting bowls. Viability felt there was only a narrow chance for any patent protection and were concerned over piece-count and how ‘component-y’ the submission felt.

    Inventor: J. Andre
    Submission: The Banana Clip

    Community: 28
    D: 04
    M: 04
    V: 08
    Staff:00
    TOTAL:44

    There was interest in the simplicity of this from some members of the design team, but overall we felt this was too much of an impulse buy. No likelihood of patent protection.

    Inventor: David Blaisdell
    WILD CARD Submission: Safe All-in-one Utensil Cleaner

    Community: 16
    D: 05
    M: 04
    V: 06
    Staff:00
    TOTAL:31

    Some interest in the problem area. While many people use a dishwasher, there are always some items, especially sharp knives, that are not intended to be washed in the dishwasher. Viability were concerned over doing a battery-powered version due to food ingress, but patent protection could be available for a unique approach.

    Eval 138

    Inventor: Jin Chai
    Selected: Collapsible Drying Rack

    Community: 32
    D:03
    M:05
    V:07
    Staff:16
    TOTAL:66

    Members of staff reacted favorably to the unique construction and careful placement of horizontal drying mesh and negative space for hanging. There is a narrow patent opportunity for a non-obvious approach and we will be working closely with our lawyers from the get-go on this one.

    The rest of the field

    Inventor: Steve Crockett
    Submission: Drying Rack With Fan

    Community: 34
    D:05
    M:04
    V:06
    Staff:00
    TOTAL:49

    Design were concerned about having to position this near an outlet, or worse still, having it battery operated (annoyance of switching out batteries). Market felt that it could be good for apartments/small homes, but that the market was limited.

    Inventor: Charles Bailey
    Submission: Ultimate Laundry Butler

    Community: 34
    D:05
    M:06
    V:07
    Staff:00
    TOTAL:52

    This had a multi-functional appeal, and an interesting challenge in material manipulation to hit a good price point.

    Inventor: Andrea Zabinski
    Submission: Collapsing Magnetic Drying Rack

    Community: 31
    D:05
    M:05
    V:07
    Staff:00
    TOTAL:48

    The comp shop showed items that were far too similar to this submission. Market commented that it did seem to make sense for larger homes with laundry rooms. Our lawyer surfaced a number of patents and commercial products that were very similar to this submission.

    Inventor: Marc Zech
    Submission: The Quad Rack

    Community: 29
    D:04
    M:04
    V:08
    Staff:00
    TOTAL:45

    Marc’s submission makes use of the same folding method as Jin Chai’s submission. However, Marc’s approach for making use of the space created between the unfolded poles was not as inspired as Jin’s solution.

    Inventor: Dave Fulton
    WILD CARD Submission: Swimsuit/Gym Clothes Drying Rack

    Community: 11
    D:05
    M:03
    V:06
    Staff:05
    TOTAL:30

    Positive response for Dave’s alternative approach to drying racks here. There was much discussion over who would be using this, and how big an opportunity it would be at retail. We certainly felt that for post-exercise and family outings it could be a useful addition to the car.

    Inventor: Marko Pavlovic
    WILD CARD Submission: Transformable Drying Rack

    Community: 27
    D:06
    M:04
    V:08
    Staff:04
    TOTAL:49

    Marko’s submission resonated with the design department due to being simple, configurable and having something of a sculptural quality. Market felt that it would be good for first apartment, while viability were balancing their lack of concern sourcing with concerns over hitting a good price point.

  • Tue, May 17 2011

    Soon we’ll be launching the Colors/Material/Finish and Naming phases for Product 133, Howard Tseng’s Collapsible Hanger idea. Fast, right?

    Howard’s original submission was so well worked out, we didn’t feel the need to go through our regular community design phases. His video said it all.

    We reached out for Howard’s prototype, made some engineering/usability adjustments, styled it up and are nearly ready to launch.

    Raymond Loewy (a famous industrial design guy) once famously said: “Never leave well enough alone.” But in this case, Howard had taken his concept so far along that there was very little left to do except polish it up and release it into the world. Help us put the finishing touches!

  • Mon, May 16 2011

    Congrats Steve!

    By gaz at 3:54 pm

    Congratulations to Steve Crockett’s wild card entry for being selected to move into the design phases!

    Eval 131

    WINNER

    Inventor: Steve Crockett
    Selected: Flexible Garden Hose Wand

    Community: 26
    D: 07
    M: 08
    V: 05
    Staff: 18
    Total: 64

    Design saw potential here for the solution to be achieved by making an attachment for any hose that added positionable functionality. Market loved this attachment approach because it means we can execute on the submission without getting into the hose business. The patent landscape for flexible hoses is complex, so we will be working very closely with our patent lawyers during the design phases on this product.

    REST OF THE FIELD

    Inventor: Seun Ajanwachuku
    Submission: The All-Star Stand
    Community: 35
    D: 04
    M: 05
    V: 07
    Staff: 00
    Total: 51

    Our competitive research revealed that there is a glut of similar products on the market. However, market felt that it being universal made it unique to market. Viability recognized that this uniqueness could help navigate the many patents that exist for electronics stands.

    Inventor: James Breaux
    Submission: Mighty Toothbrush Holder
    Community: 33
    D: 03
    M: 04
    V: 08
    Staff: 00
    Total: 48

    Design had seen this all before: check out Koziol and Alessi’s more playful end of their product lines. We also felt that the small problem being solved has already been tackled by our existing product, Bobble Brush. We pride ourselves on creating solution-based products, and this didn’t fit the bill.

    Inventor: Bill Ward
    Submission: Prep Bowls
    Community: 32
    D: 04
    M: 04
    V: 06
    Staff: 05
    Total: 51

    Lots of discussion around this one, with strong arguments being made for its use of vertical space while preparing food. Competitive research showed plenty of existing nesting prep bowls, but nothing quite like this. Market were still not sure this was unique enough to truly stand out in a crowded market place. Chance of patent protection was unlikely, and upfront cost would probably be on the high side due to multiple pieces.

    Inventor: Daniel Somech
    Submission: The Lock Sleeve
    Community: 32
    D: 04
    M: 05
    V: 06
    Staff: 00
    Total: 47

    While we appreciate that the problem being highlighted affects a lot of people, we could not see any benefit to this solution after eval discussion. The sleeve only offers a reminder immediately after the door is locked. It would have to fit all key sizes, and we’d have to ensure that it did not impede use of the key in the first place.

    Inventor: Marc Rumaner
    Submission: Food Storage Container with Plate Included
    Community: 26
    D: 03
    M: 03
    V: 07
    Staff: 00
    Total: 39

    Essentially very similar to several other food storage devices on the market, and therefore very low wow factor potential. Viability acknowledged that they would be easy to make, but that there would be no potential for patent protection.

    Wild Card Inventor: Bob Fuller
    Submission: Lotion Applicator
    Community: 10
    D: 04
    M: 02
    V: 05
    Staff: 00
    Total: 21

    When picking the wild cards this appeared to have potential. However, after competitive research was performed, it quickly became apparent that this problem/solution area has been widely explored. Our head of sales pitched this idea to several retailers back in 2007 and it was not well received, and the viability score was impacted by the existence of a number of very close patents.

    Eval 132

    We did not select a submission to move forward into the design phases. This was for a number of reasons. Firstly, the feedback from our retail partners for this retail-led brief was not positive. This alone was not a reason to not make a selection, but after discussions about potential sales channels and our competitive research, nothing was rising to the top. After the staff soaked up all the DMV, competitive research, and retail feedback, the picture was very clear and the decision was unanimous to not make a selection.

    REST OF THE FIELD

    Inventor: Denny Fong
    Submission: Eco Dryer Balls
    Community: 36
    D: 05
    M: 06
    V: 06
    Staff: 00
    Total: 53

    We were interested in the use of Sodium Polyacrylate, but were concerned over the effectiveness of using it in ball form due to lack of contact surface area. We expanded on the idea during discussion: what if it was in the form of a sheet, and you used it for quick drying while camping, etc? Market felt that it had potential (despite a lack of positive feedback from retail partners) but viability was uncertain about sourcing Sodium Polyacrylate and associated regulatory requirements.

    Inventor: William Fine
    Submission: Garment Roll Up
    Community: 34
    D: 03
    M: 02
    V: 08*
    Staff: 00
    Total: 47

    This doesn’t really solve a garment upkeep problem, unless you truly believe that rolling shirts reduces wrinkles/damage to clothes. There was some interest in the idea for storage, especially from our lawyer*. Certainly, as submitted, this takes up more room due to the wasted space in the tubes.

    *Our lawyer’s positive reaction to this idea is probably due to the fact that he joined just weeks ago from a large banking institution, and is still drunk on the fact that he can now roll into work in hip hop t-shirts and jeans.

    Inventor: Patricia DiBart
    Submission: The Collar Iron
    Community: 33
    D: 06
    M: 04
    V: 05
    Staff: 00
    Total: 48

    The competitive research showed a number of mini irons, but none that utilized a double surface. We weren’t sure if the double clamping surface offered enough wow factor or functionality to be disruptively innovative in its category.

    Inventor: Tim Hayes
    Submission: Portable and Cordless Handheld Steamer
    Community: 22
    D: 06
    M: 04
    V: 04
    Staff: 00
    Total: 36

    A number of handheld steamers exist on the market and we weren’t convinced that the added dock and possible cordless feature would be enough to make it unique. Market felt that while there was a lot of competition, there was potential opportunity in the market for the right idea. There is a lot of IP surrounding this product category, so patent protection was deemed unlikely.

    Inventor: Samuel Rivera
    Submission: Lint Removing Glove
    Community: 20
    D: 03
    M: 05
    V: 08
    Staff: 00
    Total: 36

    Design felt that while the inversion of glove for storage was interesting, the basic concept was gimmicky and lacking potential for improving on the convenience of a traditional lint brush. Our head of sales previously sold a disposable version of this that bombed at retail, but stated that he thought that there was a good opportunity here if priced and designed right. Surprisingly, there is potential for patent protection here, hence a strong viability score.

    Wild Card Inventor: David Kowal
    Submission: Portable Lint Remover
    Community: 16
    D: 03
    M: 03
    V: 08
    Staff: 00
    Total: 30

    Design liked the unique portability of this item as first, but the competitive research revealed a few very similar items on the market. Market was very concerned about price point, in a market where you can buy disposable travel lint rollers for 49c. No potential for patent protection but also no challenge for manufacturing.

    Wild Card Inventor: Gary Lindsley
    Submission: Stain Soaking Sponge
    Community: 17
    D: 06
    M: 05
    V: 07
    Staff: 00
    Total: 35

    This struck us as unique, and potentially a good solution if it worked. After discussion though, we weren’t convinced it was something that we would be interested in moving ahead with, and concerns over potential damage to clothing due to over-exposure to chemicals were raised. As presented, it was deemed that there was little chance for patent protection.

  • Mon, May 9 2011

    Congratulations to Tanya John, Brian Buzzelli and Tim Hayes for being selected to move into the design phases!

    Eval 129

    Selected: Carry-all Bracelet
    Inventor: Tanya John

    This was a hotly discussed item. Design was concerned that it would not be able to realistically contain everything you would need to carry to completely avoid using a handbag. Getting into a market dominated by fashion brands was Market’s primary concern. Viability felt we could execute at manufacturing but that the idea would require some way of customizing to keep up with changes in fashion. However, the idea was selected to move forward as it is an opportunity to explore a more fashion-forward idea submission, team up with some interesting new manufacturing partners and solve the problem that Tanya defined.

    Selected: Buzz Painter Lid
    Inventor: Brian Buzzelli

    From a design point of view, we were viewing this wild card submission as a utility belt for paint cans. While it was felt that adding functionality on the inside of the can diameter could prove to be problematic, there are any number of ways this problem-solving submission could be taken with the help of the community!

    The rest of the field:

    Inventor: Peter A. Wachtel
    Submission: Smart Handle

    Interesting problem to solve, and a nice challenge to have it fit a variety of bags, products etc. Market score was reduced over pricepoint concerns.

    Inventor: Jim Young
    Submission: Cable Loopster

    There are a number of similar solutions on the market, indeed some of which are made by Quirky already. Nice execution though from one of the guys behind PadPivot!

    Inventor: Miha Mlakar
    Submission: Easy Clean Trash Can

    Interesting problem being solved, could have been simplified by just having the bottom removable (the area that is the hardest to reach and gets the most dirt ingress). The frequency of the problem didn’t seem to require such an intense solution.

    Inventor: Nichola Jinkinson
    Submission: Dustpan With Floor Seal

    This was popular with a few key staff members. Really elegant solution. There was some concerns over truly getting a good floor seal with as much flexible material as shown in the submission, but would be easy enough to solve.

    WILD CARD Inventor: Imants Caklais
    Submission: Foldable/Telescopic Broom

    This got picked as a wild card as it had potential as a line extension for Broom Groomer. Getting this to fold and be useful would be a great challenge.

    Eval 130

    Selected: Modular K-Cup Organizer
    Inventor: Tim Hayes

    This wild card shone through. The market for coffee pod storage is already saturated with a variety of holders, and this submission had a unique approach. We loved that it offered a total customizable solution, and we think it will be a real talking point come coffee time. There are some existing modular storage patents, so we will be working with the community to come up with a really creative approach.

    The rest of the field:

    Inventor: Andrea Zabinski
    Submission: Under Shelf K-Cup Rack

    This is a great space saving design, particularly good for those with limited counter space. Our retail partners know of similar items being developed, reducing wow factor. One other small concern was being able to securely clip to shelf without hardware, but also have it safely slide out. This would be easily solved for though.

    Inventor: Marvin Blaine
    Submission: Smart Brewing Cup

    This submission was heavily penalized for not working with coffee pods. The pods require a pressurized flow of water through the pod, and there was nothing in this submission that hinted at how this would be achieved.

    Inventor: Joshua Wright
    Submission: Keurig Iced

    The main concern here was how to ensure that it would fit all types of machines/mugs. Often, there is little clearance between the top of the mug and the machine faucet. Unique approach to the problem though, and an interesting regulatory approval area in terms of using chilling chemicals for a food-contact item.

    Inventor: Marc Zech
    Submission: Coffee Pod Dispenser

    Market liked that it was easy to understand, but lowered their score due to lack of uniqueness. Members of the design staff have experience making coffee pod storage and felt that the mechanism presented had many flaws in reality (retaining the lip circumference of the next pod after the first has fallen is a tricky timing/tolerance balance).

    Inventor: Jeff Madden
    Submission: Portable K-Cup Coffee Maker

    Interesting solution, but exists for Illy pods and is therefore a potentially tough patent landscape. There were other concerns over liability associated with putting hot water under pressure in a handheld item.

    WILD CARD Inventor: Rabea Ahyad
    Submission: Coffee Storage Station

    This space saving design is not terribly unique to the market, but does solve a storage problem. No chance of patenting as core concept is firmly in the public domain.

    WILD CARD Inventor: Claire Davis
    Submission: K-Cup Repurposer

    Design liked that this solution was a refreshing outside-the-box submission. Coffee grounds are great for plants due to their carbon to nitrogen ratio. Market felt that the solution was off-brand for Quirky and that we don’t have the retail partners.

  • Mon, May 2 2011

    Congratulations to last week’s winners!

    Eval 127

    Top 5: Meatball Press Machine from Marvin Blaine| Swiss Army iPad Stylus from Tim Hayes | Collapsible Hanger from Howard Tseng | Extra Loud Bike Horn from HeiniZ| Silicone Zip Loc Bag from Jin Chai

    Wild Card: Laptop Dock from Tumi Oredein

    Selected: Collapsible Hanger
    Inventor: Howard Tseng

    Selected: Silicone Zip Bag
    Inventor: Jin Chai

    The Collapsible Hanger was a no-brainer, and almost walked away with a unanimous vote! It has wow factor, is genuinely inventive, and we love its potential for compact travel. Alongside the hanger, a good number of people at QHQ were really interested in the Silicone Zip Bag, and while we felt it should have been submitted into the silicone brief round, we understand that Jin had already submitted a relatively similar idea there. So we decided to select two submissions. Congratulations to both of you!

    Eval 128

    Top 5: Universal Pot/Pan Lid from Denny Fong | Silicone Sandwich Pocket from Miha Mlakar | Collapsible Pot Lid from MichelleB | Ultimate Beverage Container from zymie | Digital Measuring Cup from Jared Joyce

    Wild Cards: Goldfish Bowl from MarcR | Flexible Glasses from G James

    Selected: Flexible Glasses
    Inventor: G James

    Lots of heated discussion over this round. After eliminating the submissions in the top five that had very similar competitors in the market place, we went with one of our wild cards, the flexible glasses. Please note the omission of ‘reading’. We will be opening this up to look at possible application of this material for a variety of glasses, which may or may not have prescription lenses.

  • Wed, Apr 27 2011

    Kettle Konundrum

    By gaz at 8:48 pm

    Product 82, Brian Wethington’s Fast-Boiling Kettle submission, has presented us with a wonderful engineering and prototyping challenge over the past couple of months. We strive to make a certain amount of selections at eval that really push us out of our comfort zone, but with the knowledge that if we get it right it will be a killer product. With this approach, you expect that there will be times that we fail.

    We have approached the kettle submission from a variety of directions. Early on in the process, we expected that Brian’s clever core concept of an internal chimney was a strong direction for open flame heating, but inherently inefficient for electric stoves. Shutting out a huge proportion of the market was unacceptable, so this concept was out of the window. We began to work our way through a variety of options, including introducing internal heat sinks, various insulating methods, internal copper heat-distribution piping. Prototyping these concepts led to some fairly creative use of copper heat pipes, computer heat sinks, and even copper deck screws!

    Alas, after much testing on the stoves of the Quirky workshop, we got no closer to finding a disruptively innovative solution (i.e. a significantly faster boiling time).

    After spending many hours prototyping, our gut feeling was that, even with continued testing and mock-ups, we would get no closer to our elusive goal. It was time to make a tough decision. We felt that it was a simple choice between two outcomes: Option 1: kill the project. Option 2: go ahead with a Quirky-branded kettle and open it up to the community to ideate on what the core concept could be, with Brian taking a reduced influence. We felt it incredibly important that the final decision came from Mr. Wethington himself, so early this morning (even earlier for Portland-based Brian), we called him up to explain the situation and get his decision.

    Brian has decided that he would like the project to be opened up to the community and has graciously accepted a reduced influence percentage. So, very soon we will be launching the concept phase for this product, and will be hoping the community can help us to come up with a core concept that is ‘disruptively innovative’ and cause a genuine paradigm shift in the kettle market.

  • Fri, Apr 22 2011

    Congratulations to our two eval selections this week, announced live on HSN!

    Eval 123 (regular eval)
    Selected: Car Wash Sponge System
    Inventor: Jim Siegrist

    Picked as a wild card, this submission was an interesting twist on car cleaning. Market felt that it has mass appeal, and Design is interested in its potential as a line extension to Sudsi. We think there is plenty for the community to get involved with here, and now that it is warming up a bit, everyone can get outside and experiment with ways to improve Jim’s submission.

    Eval 124 (Paper Towel Holder brief)
    Selected: Spin And Lock Holder
    Inventor: Gideon Weinwerth

    This stimulated a lot of debate. It’s a complex patent landscape when it comes to mechanized paper towel holders, but we felt this submission was a great starting point. Recently, two extremely talented engineers joined our New York office, so we are confident that we will be able to take this interesting places.

    Note from Jess: From now on, we’ll be posting quick blog entries announcing each week’s winners instead of posting eval recap videos. Previous eval recap videos will still be available on the blog and YouTube, and they’re a great resource for those seeking to learn more about why we choose the products we choose.

  • Wed, Jan 5 2011

    So it looks like there’s still some confusion around the Concept Phase for Product 78, our brief-based Farmer’s Market Bag. Our bad.

    Peter’s winning ‘Orange Bag’ submission already had a well defined direction. For this round, we should be riffing on his winning submission: improving usability and ergonomics… considering size and materials… positioning of the shoulder strap and bag compartments. Really, this round should be more like a ‘refine’ round than a ‘concept’ round. This has not been made clear by Q. We apologize.

    So here’s the deal. We are removing ALL QDS sketches from the round to avoid confusion. Anyone who voted for these submissions will get their votes back to use again. We will submit fresh sketches over the next few days that are close-in refinements of Peter’s bag. The round will be extended again, until Wednesday, January 12th.

    To further clarify, here is some design direction you should use as guidance when submitting ideas:

    The bag WILL:
    1) collapse down when not in use
    2) be ergonomic, easy to carry. We already stated in the eval video that the bag must change from its original shape (we suggested a ‘kidney shape’). Think of bags you carry load in and how those bags are designed to comfortably distribute weight on your body.
    3) incorporate breathable but protective mesh compartments
    4) have sections that can be adjustable
    5) have compartments for larger items

    The bag WILL NOT:
    1) look like an orange

    Ok. Go to it. This bag should, and WILL, rock.

  • Sun, Jan 2 2011

    Happy New Year everyone!

    The Concept Phase for the Farmer’s Market bag was launched with several submissions which deviated from the winning product idea. Here’s what happened and how we’re correcting it.

    The Quirky team has been thin on the ground due to the holidays, and things can slip through the net. I was in the middle of a lake floating around with the wife and mother-in-law when I caught wind of this issue.

    With a lot of the brief-based evals, we are developing an already well-defined idea from the get-go (as is the case with the winning idea, Peter’s ‘Orange Bag’). The Quirky Design Staff posted ideas that explore concepts outside the scope of the picked eval winner. The Quirky team is made up of very talented and honest people, from interns up to seniors. We all put 100% into our work and respecting the process. No malicious intent or ‘stealing’.

    Here are our action steps for correcting this issue asap over the next couple of days: 
    1) Removing QDS concepts from the round that redundantly stray outside design scope; 
    2) Ensure votes used on these concepts are returned for fresh distribution; 
    3) Blog post to confirm this to the wider community audience; 
    4) Confirm with the community that the matter has been cleared-up satisfactorily.

    We appreciate your participation and feedback at every step of the way. 2011 is going to be a huuuuge year for Quirky, and we need you all calling us out on our actions and process to make this work. We need you here for the good, the bad and the ugly! Thank you for your understanding.

    Update: As promised, here is confirmation that we have removed the QDS concepts in question, and all community votes have been returned to their rightful users. We have also extended the Farmers Market Concept Phase to 5pm Thursday so that everyone has a change to use their votes. So jump in there and let us know your faves!

Page 1 of 3123»