Posts Tagged ‘p131’

  • Thu, Aug 4 2011

    Ordinary garden attachments are all washed up. Aqueduct attaches to your garden hose to control the direction of the water and the type of water spray, while easing arm strain. Features like a multi-angle locking hinge and nozzle with choice of spray settings make chores easier, so you can move on to what matters: enjoying your beautiful garden!

    Steve Crockett wanted a better way to water his plants. Over 594 people came together to make an awesome product that does that in a variety of ways. Aqueduct is now available in the Quirky shop for $23.99 presale ($29.99 retail) with a threshold of 1300 commitments.

    Uses:
    -Hold upright to use like normal hose, the ergonomic trigger and solid-body tube will ease strain
    -Angle and hold at your side to water lower areas without bending over
    -Angle and hold higher to access hard-to-reach places like gutters, car roofs, and hanging plants
    -Stake into ground and angle upwards to use as sprinkler
    -Secure to a tree for focused spraying in a higher position

    Features:
    -Hose attachment fits standard garden hoses
    -Hard “exoskeleton” controls the direction of the water flow
    -Locking hinge angles water flow precisely where you want it
    -Nozzle head rotates to switch easily between 4 spray settings, including a “shower spray” setting
    -Attached stake inserts into ground to hold hose in place, and folds neatly out of the way
    -Hose trigger designed for lower strain use and can be locked into “on” position

    Dimensions:
    -14.37″ length fully extended
    -1.5″ diameter body
    -2.4″ diameter nozzle

  • Fri, Jul 1 2011

    While working on Steve Crockett’s Memory Flex Hose Wand, we here in the QDS realized that we had sort of hit a wall of uncertainty after releasing our sketches and starting up the Concept round. There was only so much we could do in our cramped city office to learn about the usability and functionality of all the different concepts presented. Speculating what might work well was simply not going to cut it, so on a sunny day last week, a few of us hit the road (or train) into New Jersey to test out some of our prototypes.

    Once we set up in a garden backyard, we got to work testing out prototypes we had made out of wires, pipes, and other chopped up hoses and accessories. Right off the bat it became clear that the concepts that used coil exoskeletons were too clunky and difficult to use. As we tried our memory flex mockup, we came to the conclusion that it would be nearly impossible to strike a balance between rigid and flexible that would suit all people of different strengths and all water pressures. Our mocked up version of the “Ball Joint” concept was clearly the easiest to use.

    As we played around with the mockup, we realized that we could simplify it even further. The original sketch had 4 segments. Our mockup had 3, and as we staked it to the ground and held it, we decided to snap off the last segment.   With that change we cut out 33% of the material, and made it simpler and easier to control. Due to the constrictions of our mockup, our ball join was more like a standard single axis hinge, but this revision also made the product easier to use. It staked into the ground well, it helped reach hanging plants, and was able to wedge into trees. The two segments also provided the right geometry to aim the hose at lower hard to reach spots without bending over.

    Through all that testing we were able to hurdle that “wall of uncertainty” and move forward with the details of the design. The idea has evolved into a hose attachment with 1 hinge point that clicks into different angled positions. Check out early renderings and vote for your favorite look in our CMF Phase.

  • Mon, May 16 2011

    Congrats Steve!

    By gaz at 3:54 pm

    Congratulations to Steve Crockett’s wild card entry for being selected to move into the design phases!

    Eval 131

    WINNER

    Inventor: Steve Crockett
    Selected: Flexible Garden Hose Wand

    Community: 26
    D: 07
    M: 08
    V: 05
    Staff: 18
    Total: 64

    Design saw potential here for the solution to be achieved by making an attachment for any hose that added positionable functionality. Market loved this attachment approach because it means we can execute on the submission without getting into the hose business. The patent landscape for flexible hoses is complex, so we will be working very closely with our patent lawyers during the design phases on this product.

    REST OF THE FIELD

    Inventor: Seun Ajanwachuku
    Submission: The All-Star Stand
    Community: 35
    D: 04
    M: 05
    V: 07
    Staff: 00
    Total: 51

    Our competitive research revealed that there is a glut of similar products on the market. However, market felt that it being universal made it unique to market. Viability recognized that this uniqueness could help navigate the many patents that exist for electronics stands.

    Inventor: James Breaux
    Submission: Mighty Toothbrush Holder
    Community: 33
    D: 03
    M: 04
    V: 08
    Staff: 00
    Total: 48

    Design had seen this all before: check out Koziol and Alessi’s more playful end of their product lines. We also felt that the small problem being solved has already been tackled by our existing product, Bobble Brush. We pride ourselves on creating solution-based products, and this didn’t fit the bill.

    Inventor: Bill Ward
    Submission: Prep Bowls
    Community: 32
    D: 04
    M: 04
    V: 06
    Staff: 05
    Total: 51

    Lots of discussion around this one, with strong arguments being made for its use of vertical space while preparing food. Competitive research showed plenty of existing nesting prep bowls, but nothing quite like this. Market were still not sure this was unique enough to truly stand out in a crowded market place. Chance of patent protection was unlikely, and upfront cost would probably be on the high side due to multiple pieces.

    Inventor: Daniel Somech
    Submission: The Lock Sleeve
    Community: 32
    D: 04
    M: 05
    V: 06
    Staff: 00
    Total: 47

    While we appreciate that the problem being highlighted affects a lot of people, we could not see any benefit to this solution after eval discussion. The sleeve only offers a reminder immediately after the door is locked. It would have to fit all key sizes, and we’d have to ensure that it did not impede use of the key in the first place.

    Inventor: Marc Rumaner
    Submission: Food Storage Container with Plate Included
    Community: 26
    D: 03
    M: 03
    V: 07
    Staff: 00
    Total: 39

    Essentially very similar to several other food storage devices on the market, and therefore very low wow factor potential. Viability acknowledged that they would be easy to make, but that there would be no potential for patent protection.

    Wild Card Inventor: Bob Fuller
    Submission: Lotion Applicator
    Community: 10
    D: 04
    M: 02
    V: 05
    Staff: 00
    Total: 21

    When picking the wild cards this appeared to have potential. However, after competitive research was performed, it quickly became apparent that this problem/solution area has been widely explored. Our head of sales pitched this idea to several retailers back in 2007 and it was not well received, and the viability score was impacted by the existence of a number of very close patents.

    Eval 132

    We did not select a submission to move forward into the design phases. This was for a number of reasons. Firstly, the feedback from our retail partners for this retail-led brief was not positive. This alone was not a reason to not make a selection, but after discussions about potential sales channels and our competitive research, nothing was rising to the top. After the staff soaked up all the DMV, competitive research, and retail feedback, the picture was very clear and the decision was unanimous to not make a selection.

    REST OF THE FIELD

    Inventor: Denny Fong
    Submission: Eco Dryer Balls
    Community: 36
    D: 05
    M: 06
    V: 06
    Staff: 00
    Total: 53

    We were interested in the use of Sodium Polyacrylate, but were concerned over the effectiveness of using it in ball form due to lack of contact surface area. We expanded on the idea during discussion: what if it was in the form of a sheet, and you used it for quick drying while camping, etc? Market felt that it had potential (despite a lack of positive feedback from retail partners) but viability was uncertain about sourcing Sodium Polyacrylate and associated regulatory requirements.

    Inventor: William Fine
    Submission: Garment Roll Up
    Community: 34
    D: 03
    M: 02
    V: 08*
    Staff: 00
    Total: 47

    This doesn’t really solve a garment upkeep problem, unless you truly believe that rolling shirts reduces wrinkles/damage to clothes. There was some interest in the idea for storage, especially from our lawyer*. Certainly, as submitted, this takes up more room due to the wasted space in the tubes.

    *Our lawyer’s positive reaction to this idea is probably due to the fact that he joined just weeks ago from a large banking institution, and is still drunk on the fact that he can now roll into work in hip hop t-shirts and jeans.

    Inventor: Patricia DiBart
    Submission: The Collar Iron
    Community: 33
    D: 06
    M: 04
    V: 05
    Staff: 00
    Total: 48

    The competitive research showed a number of mini irons, but none that utilized a double surface. We weren’t sure if the double clamping surface offered enough wow factor or functionality to be disruptively innovative in its category.

    Inventor: Tim Hayes
    Submission: Portable and Cordless Handheld Steamer
    Community: 22
    D: 06
    M: 04
    V: 04
    Staff: 00
    Total: 36

    A number of handheld steamers exist on the market and we weren’t convinced that the added dock and possible cordless feature would be enough to make it unique. Market felt that while there was a lot of competition, there was potential opportunity in the market for the right idea. There is a lot of IP surrounding this product category, so patent protection was deemed unlikely.

    Inventor: Samuel Rivera
    Submission: Lint Removing Glove
    Community: 20
    D: 03
    M: 05
    V: 08
    Staff: 00
    Total: 36

    Design felt that while the inversion of glove for storage was interesting, the basic concept was gimmicky and lacking potential for improving on the convenience of a traditional lint brush. Our head of sales previously sold a disposable version of this that bombed at retail, but stated that he thought that there was a good opportunity here if priced and designed right. Surprisingly, there is potential for patent protection here, hence a strong viability score.

    Wild Card Inventor: David Kowal
    Submission: Portable Lint Remover
    Community: 16
    D: 03
    M: 03
    V: 08
    Staff: 00
    Total: 30

    Design liked the unique portability of this item as first, but the competitive research revealed a few very similar items on the market. Market was very concerned about price point, in a market where you can buy disposable travel lint rollers for 49c. No potential for patent protection but also no challenge for manufacturing.

    Wild Card Inventor: Gary Lindsley
    Submission: Stain Soaking Sponge
    Community: 17
    D: 06
    M: 05
    V: 07
    Staff: 00
    Total: 35

    This struck us as unique, and potentially a good solution if it worked. After discussion though, we weren’t convinced it was something that we would be interested in moving ahead with, and concerns over potential damage to clothing due to over-exposure to chemicals were raised. As presented, it was deemed that there was little chance for patent protection.