Posts Tagged ‘cmf project’

  • Fri, Jul 1 2011

    While working on Steve Crockett’s Memory Flex Hose Wand, we here in the QDS realized that we had sort of hit a wall of uncertainty after releasing our sketches and starting up the Concept round. There was only so much we could do in our cramped city office to learn about the usability and functionality of all the different concepts presented. Speculating what might work well was simply not going to cut it, so on a sunny day last week, a few of us hit the road (or train) into New Jersey to test out some of our prototypes.

    Once we set up in a garden backyard, we got to work testing out prototypes we had made out of wires, pipes, and other chopped up hoses and accessories. Right off the bat it became clear that the concepts that used coil exoskeletons were too clunky and difficult to use. As we tried our memory flex mockup, we came to the conclusion that it would be nearly impossible to strike a balance between rigid and flexible that would suit all people of different strengths and all water pressures. Our mocked up version of the “Ball Joint” concept was clearly the easiest to use.

    As we played around with the mockup, we realized that we could simplify it even further. The original sketch had 4 segments. Our mockup had 3, and as we staked it to the ground and held it, we decided to snap off the last segment.   With that change we cut out 33% of the material, and made it simpler and easier to control. Due to the constrictions of our mockup, our ball join was more like a standard single axis hinge, but this revision also made the product easier to use. It staked into the ground well, it helped reach hanging plants, and was able to wedge into trees. The two segments also provided the right geometry to aim the hose at lower hard to reach spots without bending over.

    Through all that testing we were able to hurdle that “wall of uncertainty” and move forward with the details of the design. The idea has evolved into a hose attachment with 1 hinge point that clicks into different angled positions. Check out early renderings and vote for your favorite look in our CMF Phase.

  • Mon, Apr 11 2011

    The Quirky Design Staff has been sketching away behind the scenes on a line extension of our popular Cloak case, specifically designed for the iPad 2. We’re almost ready to launch, but first, we need your help finalizing color choices. Throw your vote into our Color/Materials/Finish project.

    Note: We won’t be awarding influence for this round, but we will be awarding influence for buying in Presale. Just throwin’ that out there.