Posts Tagged ‘p135’

  • Thu, Jun 16 2011

    Here’s a product that won’t leave you hanging. Links is a set of hooks which can store as a flat sheet and bend open for use. The hooks can be separated to use one at a time or be kept attached as an entire row of hooks. Use them as you need them!

    David Quirk proposed a system of hooks that people could keep on hand and use when needed. Over 533 people came together to develop this idea into a product. Links is now available in the Quirky store in packs of 2 for $8.99 presale ($9.99 retail) with a threshold of 800 commitments.

    Features

    -Each sheet is made of powder coated stamped steel
    -2 sheets per presale order
    -3 hooks per sheet
    -Hooks can be separated or used together
    -Perforations for hooks to bend easily out and back to flat
    -Holes for permanent screw attachment
    -Adhesive strips included for temporary mounting

    Dimensions

    -Full sheet: 12.86″ width x 1.18″ height x .03″ depth
    -Single hook: 4.26″ width x 1.18″ height x .03″ depth

  • Mon, May 23 2011

    Congrats David!

    By rob at 5:11 pm

    Congratulations to David Quirk for his selected submission being moved into the Quirky Design Phases!

    Eval 134

    After much discussion, we felt there wasn’t anything in this eval round that we would want to proceed with into the design phases. Again, the feedback from our retail partners was not positive. Competitive research and sales channels concerns were again bringing up red flags. It’s a hard decision to make, but we feel it’s an important option to have to ensure that we are creating the best product line possible.

    Inventor: Peter A. Watchel
    Submission: Garden Desk

    COMMUNITY:36
    D:04
    M:05
    V:08
    STAFF:00

    TOTAL:53

    Design were concerned over potentially introducing a large lump of plastic into a very organic hobby. Market felt that other solutions would work better at retail, but that it was a good-sized market. Viability felt this would be easier enough to produce, but shipping could be a problem for good margins.

    Inventor: Marc Zech
    Submission: The Cord Ball

    COMMUNITY:05
    D:05
    M:06
    V:09
    STAFF:00

    TOTAL:51

    Design felt that this was a simple improvement but not truly innovative. Also, in order to have a UL-listed 3-prong plug it would be very difficult to manage a meaningful length of cord. Market felt we had the sales channels, and viability felt it would be easy to produce.

    Inventor: Marnie Perri
    Submission: Zip Loc Bag Holder

    COMMUNITY:27
    D:03
    M:04
    V:09
    STAFF:00

    TOTAL:43

    Design felt that the problem did not warrant the solution. Market discounted for novelty. Viability said this would be easy to make although there were some existing patents for bag holders of this kind.

    Inventor: Vincent Vedie
    Submission: Smart Slicer

    COMMUNITY:25
    D:03
    M:04
    V:05
    STAFF:00

    TOTAL:37

    Design felt that this was not a problem that warrented the solution. Market felt it was too novelty, more a gift item than mass market. Viability had some concerns over finding a great knife vendor, and the restrictions around shipping knives.

    Inventor: Jared Joyce
    Submission: Couch Cozy

    COMMUNITY:24
    D:01
    M:03
    V:09
    STAFF:00

    TOTAL:37

    Design heavily discounted this as it exists as the ‘Couch Coozy’ (www.couchcoozy.com). Market were down on it for the same reason, and viability felt it would be easy enough to manufacture, despite patents existing.

    Inventor: Davide Ferrari
    Submission: Multi-shape paint roller

    COMMUNITY:19
    D:05
    M:04
    V:08
    STAFF:00

    TOTAL:36

    Design felt that while this could improve workflow, there was a lot of concern as to how this would usefully flex and also how it would be cleaned. The solution needs a lot of work. Market felt that it was a tough market to compete in given that you can buy very cheap rollers at Home Depot. Viability noted that we have the suppliers to make the parts, and that patent protection was possible for a unique approach.


    Eval 135

    Inventor: David Quirk
    Selected: Hooks On A Roll

    Tough round, the end vote was between choosing nothing and David’s Hooks On A Roll. There was enough interest among QDS for David’s idea that we have moved it into the design phases.

    COMMUNITY:03
    D:05
    M:06
    V:07
    STAFF:13

    TOTAL:34

    The rest of the field:

    Inventor: Marko Pavlovic
    Submission: Retractable Hooks

    COMMUNITY:35
    D:02
    M:03
    V:08
    STAFF:00

    TOTAL:48

    Exists on market as submitted. Viability score was high due to ease of manufacture.

    Inventor: Joseph Hummel
    Submission: Pop Out Wall Hooks

    COMMUNITY:30
    D:03
    M:03
    V:07
    STAFF:00

    TOTAL:43

    Design discounted this due to installation concerns and the fact that you would have to make a sizable hole in the wall. Market felt that it was not solving a problem they could sell. Viability felt that a non-obvious approach could be patentable.

    Inventor: Andrea Zabinski
    Submission: Swivel Hook

    COMMUNITY:29
    D:04
    M:03
    V:07
    STAFF:00

    TOTAL:43

    Design felt this would be useful for organizing closets. Market did not understand what problem this was solving. Viability felt that there could be patent protection here for a unique engineering approach.

    Inventor: David Sultana
    Submission: Multi-use Carry Hook

    COMMUNITY:28
    D:04
    M:03
    V:08
    STAFF:00

    TOTAL:43

    Design and market felt there were very similar items on the market. Viability score was high due to it not being too much of a sourcing challenge and narrow patent protection potential.

    Inventor: Stacy Prince
    Submission: Go-anywhere Hook

    COMMUNITY:27
    D:05
    M:04
    V:09
    STAFF:00

    TOTAL:45

    Before the final choice of nothing or David Quirk’s submission, this was still in the running. Design felt it was useful and versatile. Market were unclear of the universal usage. Viability gave this a high score as they had no concerns over manufacturing. There were some existing patents.

    Inventor: Robert Pontius
    Submission: Halo Ring Hook

    COMMUNITY:19
    D:06
    M:05
    V:01
    STAFF:00

    TOTAL:31

    Huge red flag in the patent area, so a viability score of 1.

  • Mon, May 2 2011

    This week’s Quirky brief sounds simple enough: Let’s make a hook product.

    Easy, right? Well, not quite. Let’s think this through a bit more.

    Hooks are used by different people of different ages for different uses in different locations. There are multiple ways to attach hooks to a surface: screws, nails, adhesive, pure brute force. We have to think of how the hook looks, both when in use and not. Then, of course, there’s what needs hanging, which can be, oh, anything at all.

    That’s a lot to consider, and we encourage you to think outside the box. At its core, a hook is any object that provides a surface opposing the pull of gravity of a second object. When you think of it that way, there’s really any number of directions this brief can go.

    Submissions are free, and the deadline is Monday, May 9, at 12 noon ET. Hook us up with some great ideas!