Portion
Before we can go into full-blown production and start mass-producing a product, we need to constantly review prototypes. We thoroughly inspect each prototype’s surface for things like blemishes, flashing, misspellings, etc. We also check to see if the product is functioning how it was originally intended to. During this prototyping process, we take notes on the miscalculations and make suggestions on how to correct these issues. If we find that a prototype meets our Quirky standards, we will give it the green light into production.
During the prototype checking process of Portion, a few corrections were made along the way. We found minor cosmetic issues regarding the size of the text on the spoon. For proper usability, we adjusted the text, indicating the portion measurement, to be larger so that more users could find it legible.
One of the great features of Portion is that it can measure dry and liquid ingredients in both the spoon and in the handle. Therefore, we needed the connection between the spoon and handle to be air-tight, so that nothing spills out. On one of our prototypes we noticed a little leakage down from the handle into the spoon and we quickly added an O-ring, which corrected the problem. We also included a clicking feature between the handle and spoon, which gives the user feedback as to when the product is correctly locked in place. The user can then un-click the handle for easy cleaning.
Solo
In order for Solo to work properly, half of the hanger needs to drop at the press of the button so the user can seamlessly take their clothes off of the hanger. After looking over prototypes, we noticed that when the un-lock button was pressed, the hanger did not drop as smoothly and as quickly as we wanted it to. The reason for this incorrect hanger deployment was that we did not account for the change in the material between the prototype and Bertha’s (our 3D modeling machine) mock-up. The pivot point for the prototype did not have the right tolerance or the friction between two products. So we made some adjustments in material and in the mechanism function, which corrected the issue. The unlocking discrepancy was not as noticeable when a garment was on the hanger because the fabric adds extra weight, which in turn adds more force to the dropping motion. We are very happy with the way SOLO turned out.
Grip Grater
One of the benefits of using Grip Grater over other “cheesy” graters is that you can lay it flat over the top of a bowl for easy grating. This feature is suitable to use for small bowls, by placing the center grating part on top of the bowl, or you can extend out the arms of the Grip Grater and grate over larger bowls. During the tooling phase, we noticed that the prototype’s U-shaped arms would break off too easily if the user applied pressure for grating over larger bowls. So we went to work to try to fix this issue.
First, we re-engineered the arms to have a sturdier hinge; this helped, but the prototypes were still breaking. So to strengthen the arms, while still keeping the aesthetics of the U-shaped arms sleek, we added an arced rib that runs along the body of the u-shaped arm. This decreased the material cost, added stability, and looked good; but it still wasn’t enough. Finally, we added four bumpers where the U-shaped arm meets the center grater, so that the hinge does not collapse in on itself. After all of these improvements we no longer had any breaking issues by applying pressure when using the product for larger bowls.
We are also planning on adding two more blade plates to the Grip Grater! The mandolin plate which makes wider cuts, and the two-way grater plate which allows the user to grate in both directions. Another change to the product was that we switched the color to black instead of the original white color. Our creative team felt that black gave off more of a high-end vibe, and the white was just not cutting it.

