• Mon, Apr 26 2010

    Prototypes 101

    By jess at 11:23 am

    Hey folks,

    So we realize from the comments on last week’s Cloak prototyping video blog post that there may be a little bit of confusion about what a prototype IS, exactly. Now we know that some of our community members are fluent in the language of product development, but we also know that there are countless more who aren’t. We’re happy to educate, with help from the fine folks at Wikipedia.


    Prototype

    http://en.wikipedia.org/wiki/Prototype

    Basic prototype categories

    Proof-of-Principle Prototype (Model) (also called a breadboard). This type of prototype is used to test some aspect of the intended design without attempting to exactly simulate the visual appearance, choice of materials or intended manufacturing process. Such prototypes can be used to “prove” out a potential design approach such as range of motion, mechanics, sensors, architecture, etc. …

    Form Study Prototype (Model). This type of prototype will allow designers to explore the basic size, look and feel of a product without simulating the actual function or exact visual appearance of the product. They can help assess ergonomic factors and provide insight into visual aspects of the product’s final form. Form Study Prototypes are often hand-carved or machined models from easily sculpted, inexpensive materials (e.g., urethane foam), without representing the intended color, finish, or texture …

    Visual Prototype (Model) will capture the intended design aesthetic and simulate the appearance, color and surface textures of the intended product but will not actually embody the function(s) of the final product. These models will be suitable for use in market research, executive reviews and approval, packaging mock-ups, and photo shoots for sales literature.

    Functional Prototype (Model) (also called a working prototype) will, to the greatest extent practical, attempt to simulate the final design, aesthetics, materials and functionality of the intended design. The functional prototype may be reduced in size (scaled down) in order to reduce costs. The construction of a fully working full-scale prototype and the ultimate test of concept, is the engineers’ final check for design flaws and allows last-minute improvements to be made before larger production runs are ordered.

    Differences between a prototype and a production design

    In general, prototypes will differ from the final production variant in three fundamental ways:

    Materials. Production materials may require manufacturing processes involving higher capital costs than what is practical for prototyping. Instead, engineers or prototyping specialists will attempt to substitute materials with properties that simulate the intended final material.

    Processes. Often expensive and time consuming unique tooling is required to fabricate a custom design. Prototypes will often compromise by using more flexible processes.

    Lower fidelity. Final production designs often require extensive effort to capture high volume manufacturing detail. Such detail is generally unwarranted for prototypes as some refinement to the design is to be expected. Often prototypes are built using very limited engineering detail as compared to final production intent.


    The Cloak prototype Ben tooled around with in the video is a Functional Prototype, which is our “final check” on the product’s workability. To be clear: it’s not the final product! Just wanted to clear that up. =)

  • Fri, Apr 23 2010

  • Fri, Apr 23 2010

    We do love our Jim Carrey… and our new “gym carry”. If you didn’t receive the newsletter in your inbox, check it out here!

  • Thu, Apr 22 2010

    After 325 days, we’ve moved SlingBack into production.

    As many of you know, this has sparked both an internal/external conversation about product aging and how it should affect the threshold process. We have a bunch of thoughts, and we’ll continue to monitor the respective threads on this topic on the blog/forum.

    At the end of the day, we agreed with many of your sentiments about keeping our word, etc. That, and we think Slingback is a great product.

    We hope to address the aging/threshold stuff in the next few weeks. But for now, congratulations to everyone on pushing product #14 to threshold.

  • Thu, Apr 22 2010

    Everybody, get up and dance… Switch, our new modular multi-tool pocket knife, is now available in the Quirky store! This product took a little longer than usual to design and render, but it was worth the wait. Buy yours now for a special pre-sale price of $68 (MSRP: $79) and don’t forget — free shipping if you commit in pre-sales!

    Looking for the perfect pocket knife? The search is over. Switch is the ultimate modular utility device, with 18 different attachments so you can mix and match your most frequently used tools. Customize your Switch’s width by swapping out the inner axles, or group your tools into different “themes” – home, office, outdoors, etc. However you choose to do it, Switch is your tool, your way.

    The Switch set includes:

    - Two exterior body covers, for encasing the tool attachments.

    - Two slotted caps to hold the tool together, which can be removed with the twist of a quarter to disassemble the unit.

    - Three interior axle assemblies – small (2-6 tools), medium (4-10 tools), and large (7-13 tools) — which can be swapped in and out depending on your desired tool width.

    - 18 tool attachments: Standard Knife, Pliers, Scissors, Nail File, Tweezers, Thin Flathead Screwdriver, Phillips-Head Screwdriver, Eyeglass Philips-Head Screwdriver, Eyeglass Flathead Screwdriver, Wood Saw, Serrated Saw, Corkscrew, Combination Bottle Opener/Flathead Screwdriver, Combination Can Opener/Wire Stripper, Pen, Magnifying Glass, LED Flashlight, 1GB USB Memory Stick.


  • Thu, Apr 22 2010

    First, I want to be very clear:

    Wrapster is greenlit, and Quirky is committed to making the ultimate earbud cord management solution.

    Next, I want to be equally as clear:

    Wrapster, as originally designed by the Quirky community & team, has failed user testing miserably, and is going to be redesigned prior to mass production.

    During Quick & Quirky, we asked 12 random visitors, most of whom had never heard of this product and were simply friends of staff members, to help us out with an experiment.

    We handed them the Wrapster prototypes, along with a pair of earbuds, and told them to try wrapping the cord.

    • - Only 1 of 12 wrapped the cord the “right” way.
    • - None of them believed it was a sustainable cord management solution.
    • - All of them said they thought we could do better, as a company and as a community.

    Our process at Quirky is fast for a reason. It gets us to this point in the process quicker then any other medium. We believe the concept behind the Wrapster is a good one, and that’s why we are taking the project so seriously and putting it through these exercises before pushing it out into the market.

    In cases like this, where we get it wrong, we are going to work to make sure that we set up the product to succeed to its full potential.

    As for Wrapster here are the next steps:

    • - Our designers are reviewing the raw, uncut footage in great detail to asses what peoples instincts are when it comes to cord management.
    • - Within a week or two they will provide design choices that are a bit more intuitive and organic.
    • - The community will be part of the process throughout.
    • - We will repeat our user testing on the new design once agreed upon by the community/Quirky staff.

    We believe firmly in the fact that we are not going to produce products that are not viable. It’s not in our best interests, it’s not in Matt’s best interests, and it’s not in the community’s best interests. We’d rather take the time to get it right, rather than put the product out, have it sell to a few enthused community members and then never sell another unit.

    Over the course of the next few months you will see many changes at Quirky, most of which revolve around enhancing the design/development process to assure that products that are green-lit are going to succeed. This means launching products to pre-sale with prototype videos, user interaction videos, etc.

    Wrapster will succeed. We just need to stick with it, and follow the research. We can/will make this the ultimate earbud solution.

    Rock.   FORUM POST HERE

  • Thu, Apr 22 2010

    I had to repost this super-helpful list, from InternWhisperer. Thanks to Hans Damkoehler for sharing on the forum!

    45 RULES FOR CREATING A GREAT LOGO DESIGN

    Do not use more than three colors.

    Get rid of everything that is not absolutely necessary.

    Type must be easy enough for your grandma to read.

    The logo must be recognizable.

    Create a unique shape or layout for the logo.

    Completely ignore what your parents and/or spouse think about the design.

    Confirm that the logo looks appealing to more than just three (3) individuals.

    Do not combine elements from popular logos and claim it as original work.

    Do not use clipart under any circumstances.

    The logo should look good in black and white.

    Make sure that the logo is recognizable when inverted.

    Make sure that the logo is recognizable when resized.

    If the logo contains an icon or symbol, as well as text, place each so that they complement one another.

    Avoid recent logo design trends. Instead, make the logo look timeless.

    Do not use special effects (including, but not limited to: gradients, drop shadows, reflections, and light bursts).

    Fit the logo into a square layout if possible, avoid obscure layouts.

    Avoid intricate details.

    Consider the different places and ways that the logo will be presented.

    Invoke feelings of being bold and confident, never dull and weak.

    Realize that you will not create a perfect logo.

    Use sharp lines for sharp businesses, smooth lines for smooth businesses.

    The logo must have some connection to what it is representing.

    A photo does not make a logo.

    You must surprise customers with presentation.

    Do not use more than two fonts.

    Each element of the logo needs to be aligned. Left, center, right, top, or bottom.

    The logo should look solid, with no trailing elements.

    Know who is going to be looking at the logo before you think of ideas for it.

    Always choose function over innovation.

    If the brand name is memorable, the brand name should be the logo.

    The logo should be recognizable when mirrored.

    Even large companies need small logos.

    Everyone should like the logo design, not just the business that will use it.

    Create variations. The more variations, the more likely you are to get it right.

    The logo must look consistent across multiple platforms.

    The logo must be easy to describe.

    Do not use taglines in the logo.

    Sketch out ideas using paper and pencil before working on a computer.

    Keep the design simple.

    Do not use any “swoosh” or “globe”symbols.

    The logo should not be distracting.

    It should be honest in its representation.

    The logo should be balanced visually.

    Avoid bright, neon colors and dark, dull colors.

    The logo must not break any of the above rules.

  • Thu, Apr 22 2010

    That’s right, Quirks. We wanna know what color Cloak is your fave. Tell us the truth — is it classic black? Flirty pink? Green? Blue? Answer our survey here.

    UPDATE: We’re making Cloak in black, green, blue, and pink. Everybody wins!

  • Wed, Apr 21 2010

    Yesterday, we crossed the 3000 mark on PowerCurl sales. Thanks, Quirks! And thanks to ideator Jeff Scholen, who sent us this amazing celebratory cake. You guys really know the way to our hearts =)

  • Wed, Apr 21 2010

    We’re Hiring!

    By jess at 12:10 pm

    You heard Jovena… Quirky’s a prettttttty sweet place to work. And the best part? We’re hiring! That’s right, now’s the chance to join in on all the fun. If you’re interested, qualified, and in the greater New York area, send over your application. No recruiters or third-party applications, PLEASE.

    VP Product Design

    In order to insure exceptionally high product and design quality as we grow, we’re looking for a rockstar Industrial Designer with considerable leadership experience in Consumer Products, Brand, and Marketing. The perfect candidate is dozens of successful products beyond their start in an Art School model shop, but desires the creative rush that their early career provided. Read the full job description here.

    Bookkeeping Wiz

    Ready to learn new software, dig into a big pile of paperwork and keep our records organized? We need a superstar of a bookkeeper: someone who can crunch numbers like a pro, keep our files spiffed up and help with our general office needs. This is an entry level position and doesn’t require a ton of experience. But, the position does require lots of brain power and a track record of solid use of smarts and creativity. Read the full job description here.

    General Interns

    Quirky is seeking hard-working, ass-kicking interns to join our energetic start-up team in our New York office. There will be no coffee runs, and we don’t even have a Xerox machine. Quirky interns will assist the operations, community, and content departments with, well, pretty much everything. This internship will introduce you to the world of social product development and provide hands-on experience in the fields of consumer products, social media, online community management, and marketing. Read the full job description here.

    Design Interns

    Quirky.com is an exciting and fast paced workplace for passionate and talented designers. We will be adding to our design department and are currently seeking skilled product design interns to assist our design team in developing a new consumer product a week. This internship will last approximately 3 months, from May to August. The exact start and end date will fluctuate based on the candidate’s school schedule. Read the full job description here.