Production Report: Broom Groomer
by jordanWhat we’ve been up to over the past 3 weeks:
Over the last few months we’ve been working to engineer and “productionize” the Broom Groomer. Since it’s “just” a dustpan (but really so much more!) it’s been a fairly smooth ride. We analyzed the handle to make sure it wouldn’t break easily when stepped on (you may remember when Jo-Money stepped on the handle of our first Bertha print-out and snapped it). We have also changed the “teeth” part so it’s easier to manufacture. Instead of co-molding it to the dustpan, or gluing it, the teeth will have plugs on the back that pull through to the back of the dustpan.
On October 6, we received our T1 sample back from our supplier, and it looked pretty good! Aside from a mix-up on the size of the teeth, there weren’t any glaring flaws (as T1’s can often have). A minor problem was that the Broom Groomer didn’t hang straight down, but the factory has assured us that will change for T2 and mass production. Also, the soft rubbery hang-hole easily pops out of the handle, so we are ditching the rubber so that the plastic will extend to the hang hole, and instead add a different surface finish. This way, we won’t have a brightly colored rubber piece falling off every time a retailer hangs this product on their shelves.
What we expect in the next 3 weeks:
After receiving the T1 sample on October 6, we moved quickly to send our revisions back to Q-Asia that very evening so they could relay the changes to the factory. We also sent them details on coloring and surface finishes. We should be receiving T2 samples the week of October 18. We expect that these samples will include the longer teeth, and will no longer have the extra rubbery piece in the hang hole. Hopefully the new samples will be shot in the right colors and have the spec’d out surface finishes.
We can’t wait to see them and show them to you.
Broom Groomer is available for $12 in the Quirky store.



7 Comments
By skue
AWESOME! I pre-ordered this and can’t wait to get it. Thanks for the update.
By Babs
I can’t wait either! I’m very excited about this dustpan.
By Boyd
Nice work QS! Great job catching some of the early flaws and refining Broom Groomer to improve the quality. Can’t wait to see it on store shelves some day!
By PattiD
Thrilled for the Broom Groomer.
Have to say – I love the new system of updates!
By Kaari
The “grooming” part were supposed to look more like bristles or nails to get the hair (cat, dog, human) and dustballs out of the brush. With the current design, the bristles are no longer sharp. Not sure if they are going to function well enough to get the dustballs etc out of the brush.
The end part of the handle reaching the floor is too short to be able to place your foot on it and keep the thing down when you’re trying to clean the brush. The whole thing will most likely move upward and keel when using.
I have a dustbin that has the “broom groomer” function. Due to it’s peg/bristle design which is similar to the now proposed for BroomGroomer, I was hoping for something better. If the BroomGroomers proposed design goes through, my hopes for a better alternative have been in vain.
By billward11
Love the update and the progress. All the best!
By deon
I wish it had a pole attachment so I don’t have to bend down to empty it. I hate putting my face near a pile of dust.